Rs-232 Ack Nak Retry Count - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

RS-232 ACK NAK Retry Count

This feature sets the number of times for the scanner to retry a label transmis-
sion under a retry condition.
To set the RS-232 ACK NAK Retry Count:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. The scanner will automatically exit Programming Mode when the appro-
DEFAULT
74
Set RS-232 ACK NAK Retry Count
cover any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
that represent the desired number. The selectable range is 000-255
resets. Pad all single and double digit numbers with leading zeroes to yield
a three-digit entry (000-255).
A setting of 255 specifies "retry forever."
NOTE
priate amount of digits have been scanned.
RS-232 ACK NAK Features
below. You'll need to
Alpha-Numeric Keypad in Appendix C
0608(CR)
Set RS-232 ACK NAK Retry Count
Default setting for this feature is:
003 - Three retrys
Magellan™ 3450VSi