Qr Code Url Link Enable - Datalogic Magellan 3450VSi Product Reference Manual

QR Code URL Link Enable

QR Code URL Link Enable
Enables/Disables the decoding of QR codes with a URL link on imagers other
than the optional Customer Service Scanner (CSS).
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
03A101(CR)
QR Code URL Link = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
03A100(CR)
QR Code URL Link = Disable
273