Enter/Exit Programming Mode
Expand UPC-E to UPC-A
Enables/disables expansion of UPC-E labels to UPC-A.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
004101(CR)
Expand UPC-E to UPC-A = Enable
124
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Expand UPC-E to UPC-A
004100(CR)
Expand UPC-E to UPC-A = Disable
Magellan™ 3450VSi