Software Flow Control - Datalogic Magellan 3450VSi Product Reference Manual

RS-232 Interface Features
RS-232 Software Flow Control
Enables/disables RS-232 Flow Control using XON/ XOFF characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
002101(CR)
RS-232 Software Flow Control= Enable
Product Reference Guide
This item will be ignored when the feature, RS-232 NAK Charac-
ter, is enabled
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
002100(CR)
RS-232 Software Flow Control= Disable
67