Enter/Exit Programming Mode
Code 93 Length 1
If Code 93 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 93 first fixed length. If Code 93 Length Control is set to Variable-
Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
234
Set Code 93 Length 1 on page 234
to cover any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
that represent the desired label length. The selectable range for this
option is 01 to 50. Pad all single digit numbers with a leading zero to yield
a two-digit entry (01-50).
gramming Mode bar code.
Alpha-Numeric Keypad in Appendix C
0685(CR)
Set Code 93 Length 1
Default setting for this feature = 01
Code 93 Length 1
below. You'll need
Magellan™ 3450VSi