Enter/Exit Programming Mode
Expand Code128 to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
069601(CR)
Expand Code128 to Code 39 = Enable
200
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Expand Code128 to Code 39
069600(CR)
Expand Code128 to Code 39 = Disable
Magellan™ 3450VSi