Single Cable Rs-232 Rts Cts Selection - Datalogic Magellan 3450VSi Product Reference Manual

Single Cable RS-232 Features

Single Cable RS-232 RTS CTS Selection

Specifies how RTS and CTS are used to control the data flow. RTS is controlled
by the Scanner and can be continuously held high/low, or can be asserted
during label transmission. The scanner looks at CTS, as the configuration values
state, to determine when to send label data.
RTS CTS Selection =
RTS is held in low state and CTS is ignored
047B01(CR)
Single Cable RS-232 RTS CTS Selection = Option 1
RTS CTS Selection =
Assert RTS and wait for CTS to be asserted
047B03(CR)
Single Cable RS-232 RTS CTS Selection = Option 3
RTS CTS Selection =
RTS held low, wait for CTS to be asserted
047B05(CR)
Single Cable RS-232 RTS CTS Selection = Option 5
Product Reference Guide
Enter/Exit Programming Mode
047B00(CR)
Single Cable RS-232 RTS CTS Selection = Option 0
RTS CTS Selection =
RTS is held in high state and CTS is ignored
047B02(CR)
Single Cable RS-232 RTS CTS Selection = Option 2
RTS CTS Selection =
Assert RTS and ignore CTS
047B04(CR)
Single Cable RS-232 RTS CTS Selection = Option 4
DEFAULT
RTS held high, wait for CTS to be asserted
79