Enter/Exit Programming Mode
DataBar Expanded Minimum Read
This feature specifies the minimum number of consecutive DataBar Expanded
decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D302(CR)
DataBar Expanded Minimum Read = 2
04D304(CR)
DataBar Expanded Minimum Read = 4
178
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
DataBar Expanded Minimum Read
04D301(CR)
DataBar Expanded Minimum Read = 1
04D303(CR)
DataBar Expanded Minimum Read = 3
Magellan™ 3450VSi