Enter/Exit Programming Mode
GS1 QR Code Enable
This feature controls the ability of the scanner to decode GS1 QR Code labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
047501(CR)
GS1 QR Code
274
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
= Enable
QR Code URL Link Enable
047500(CR)
GS1 QR Code
= Disable
Magellan™ 3450VSi