Codabar Length 2 - Datalogic Magellan 3450VSi Product Reference Manual

Codabar Length 2

Codabar Length 2
If Codabar Length Control is set to Fixed-Length decoding, this feature speci-
fies Codabar second fixed length. If Codabar Length Control is set to Variable-
Length decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
Product Reference Guide
When in Fixed Length mode, if Length 2 is set to the value of 00
(zero), then only Length 1 will apply.
NOTE
Set Codabar Length 2 on page 227
to cover any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
that represent the desired label length. The selectable range for this
option is 00 (meaning ignore this length), or 03 to 50. Pad all single digit
numbers with a leading zero to yield a two-digit entry (03-50).
gramming Mode bar code.
Enter/Exit Programming Mode
Alpha-Numeric Keypad in Appendix C
0239(CR)
Set Codabar Length 2
Default setting for this feature = 32
below. You'll need
227