Enter/Exit Programming Mode
Aztec Code
Aztec Enable
Enables/disables the ability of the scanner to decode Aztec labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
043001(CR)
Aztec = Enable
278
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
043000(CR)
Aztec = Disable
Aztec Code
Magellan™ 3450VSi