Length Control; Configuring Variable Length Decoding - Datalogic Magellan 3450VSi Product Reference Manual

Figure 10. Label ID Position

Length Control

Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a bar code if the label length falls in the range of the configu-
rable minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code for the desired symbology.
3. Scan the Enter/Exit Programming Mode bar code.
4. Set Length 1 to the first fixed length by following the
Programming Instructions
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed
length) by following the
below.

Configuring Variable Length Decoding:

1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Variable Length Decoding bar code for the desired symbology.
3. Scan the Enter/Exit Programming Mode bar code.
4. Set Length 1 to the first variable length by following the
2 Programming Instructions
5. Set Length 2 to the second variable length by following the
Length 2 Programming Instructions
Product Reference Guide
Options
Prefix Label ID Aim ID
When fixed length decoding is enabled, the scanner
OR
Bar Code Data
When variable length decoding is enabled, the scan-
below.
Length 1, Length 2 Programming Instructions
below.
below.
Length Control
Label ID Suffix
Length 1, Length 2
Length 1, Length
Length 1,
283