Enter/Exit Programming Mode
Micro QR Code Length Control
Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
Configuring Variable Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
042A01(CR)
Micro QR Code Length Control = Fixed Length
276
When fixed length decoding is enabled, the scanner
Length 2 Programming Instructions on page 277
fixed length) using the
Instructions on page
Length 2 Programming Instructions on page 277
Length 2 Programming Instructions on page
When variable length decoding is enabled, the scan-
Micro QR Code Length 1, Length 2 Programming
277.
042A00(CR)
Micro QR Code Length Control = Variable Length
Micro QR Code Length Control
Micro QR Code Length 1,
that follow this page.
Micro QR Code Length 1,
that follow this page.
Micro QR Code Length 1,
277.
Magellan™ 3450VSi