Codabar Length 1 - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Codabar Length 1

If Codabar Length Control is set to Fixed-Length decoding, this feature speci-
fies Codabar first fixed length. If Codabar Length Control is set to Variable-
Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
226
Set Codabar Length 1 on page 226
to cover any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
that represent the desired label length. The selectable range for this
option is 03 to 50. Pad all single digit numbers with a leading zero to yield
a two-digit entry (03-50).
gramming Mode bar code.
Alpha-Numeric Keypad in Appendix C
0238(CR)
Set Codabar Length 1
Default setting for this feature = 03
Codabar Length 1
below. You'll need
Magellan™ 3450VSi