Code 128 Length 2 - Datalogic Magellan 3450VSi Product Reference Manual

Code 128 Length 2

Code 128 Length 2
If Code 128 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 128 second fixed length. If Code 128 Length Control is set to Vari-
able-Length decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
Product Reference Guide
When in Fixed Length mode, if Length 2 is set to the value of 00
(zero), then only Length 1 will apply.
NOTE
Set Code 128 Length 2 on page 205
to cover any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
that represent the desired label length. The selectable range for this
option is 01 to 80. Pad all single digit numbers with a leading zero to yield
a two-digit entry (01-80).
gramming Mode bar code.
Enter/Exit Programming Mode
Alpha-Numeric Keypad in Appendix C
04B9(CR)
Set Code 128 Length 2
Default setting for this feature = 50 (length = 80)
below. You'll need
205