Good Read Led Idle State - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Good Read LED Idle State

This feature specifies the state of the green scanner LEDs when the scanner is
idle and ready to read a label. Options are:
•
•
To set the Scanner LEDs Idle State:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
030102(CR)
Scanner LED Idle State = On Dim
26
Off
On dim
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Good Read LED Idle State
030101(CR)
Scanner LED Idle State = Off
DEFAULT
Magellan™ 3450VSi