Code 128 Transmit Function Characters
Code 128 Transmit Function Characters
Enables/disables transmission of Code 128 function characters 1, 2, 3, and 4.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
02C701(CR)
Code 128 Transmit Function Characters = Enable
Product Reference Guide
Disabled is the recommended setting for all interfaces.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
02C700(CR)
Code 128 Transmit Function Characters = Disable
199