Enter/Exit Programming Mode
Code 93 Stitching
Enables/disables stitching for Code 93 labels. When parts of a Code 93 bar
code are presented to the scanner with this feature enabled, the bar code parts
will be assembled by the scanner's software, and the data will be decoded if all
bar code proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
06AE01(CR)
Code 93 Stitching = Enable
236
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
06AE00(CR)
Code 93 Stitching = Disable
DEFAULT
Code 93 Stitching
Magellan™ 3450VSi