USB-OEM Interface Features
USB OEM Additional Interface Options
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
Complete the programming sequence by scanning the Enter/Exit Programming
Mode bar code
055100(CR)
USB OEM Interfaces Option2 =
Disable scanner at first enumeration after BusReset
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
Enter/Exit Programming Mode
055101(CR)
USB OEM Interfaces Option2 =
Enable scanner at first enumeration after BusReset
DEFAULT
87