Scanner Control Button Options - Datalogic Magellan 3450VSi Product Reference Manual

Scanner Control Button Options

Scanner Control Button Options
Configure the Scanner Control Button to one of the following modes of opera-
tion:
•
•
•
•
To set the desired Scanner Control Button Option:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
05AF01(CR)
Scanner Control Button = Enable Only Volume Tone and Reset
05AF03(CR)
Scanner Control Button = Disable All Functions
Product Reference Guide
Enable all functions: Volume, tone, diagnostics and reset.
Enable only volume, tone and reset.
Enable reset only.
Disable all button functions
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
05AF00(CR)
Scanner Control Button = Enable All Functions
DEFAULT
05AF02(CR)
Scanner Control Button = Enable Reset Only
27