Code 128 Minimum Read - Datalogic Magellan 3450VSi Product Reference Manual

Code 128 Minimum Read

Code 128 Minimum Read
This feature specifies the minimum number of consecutive Code 128 decodes
before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
006F02(CR)
Code 128 Minimum Read = 2
006F04(CR)
Code 128 Minimum Read = 4
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
006F01(CR)
Code 128 Minimum Read = 1
006F03(CR)
Code 128 Minimum Read = 3
201