Code 128; Code 128 Enable - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Code 128

Code 128 Enable

Enables/disables the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
009201(CR)
Code 128 = Enable
198
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
009200(CR)
Code 128 = Disable
DEFAULT
Code 128 Enable
Magellan™ 3450VSi