Matrix 450™ Lighting System Control Connector; 03X Input Power Connector (On Lt-03X) - Datalogic MATRIX 450 Reference Manual

MATRIX 450™ ELECTRICAL CONNECTIONS
5.2 MATRIX 450™ LIGHTING SYSTEM CONTROL CONNECTOR
Matrix 450™ controls the LT-03x series lighting system from this connector through software.
Matrix 450™ can also receive power from this input, normally from the LT-03x lighting
system through the CAB-LD-002 cable. Matrix 450™ cannot source power through this
connector.
Figure 54 - M12 8-pin Male Lighting System Control Connector
Matrix 450™ M12 8-pin Lighting System Connector Pinout
Pin
1
2
3
4
5
6
7
8
(*) in the CAB-LD-102 LT Driver No Power cable, this pin isn't connected. In this way the
Matrix 450™ is powered ONLY from pin A of the M16 19-pin male connector.
5.2.1 LT-03x Input Power Connector (on LT-03x)
The LT-03x lighting system must be powered from this connector.
Pin
1
2
3
4
Name Function
SPOT1 Red Spot control signal
STROBE Illuminator control signal
SPOT2 Green Spot control signal
AIMING Aiming Lasers control signal
LDA I2C channel data signal
LDL I2C channel clock signal
GND Power supply input voltage negative
VDC (*) Power supply input voltage positive
PIN 1
Figure 55 - M12 4-pin Male LT-03x Input Power Connector
LT-03x M12 4-Pin Input Power Connector pinout
Name Function
VDC Power supply input voltage positive
VDC Power supply input voltage positive
GND Power supply input voltage negative
GND Power supply input voltage negative
PIN 4
PIN 3
PIN 2
5
71