Table of Contents
Advertisement
Decoding
You can configure the Falcon's decoding options by tapping on
> Control Panel > Decoding
large numbers of terminals using
There are two sections in the
tional pages. There are six General Configuration pages and multiple Bar
Code symbology pages.
Other decoding parameters are described in Programming Parameters, starting
on page F-1; bar code settings are provided in Programming Bar Codes, starting
on page G-1.
Configuration Control Panels
Select the desired configuration from the following options shown in
4, and the other
Use the pull-down menus or tap the left and right arrow keys to navigate the
different pages of the
Figure 2-4. Decoding Properties: Audio
To view other configuration options, select
Product Reference Guide
Decoding Properties
Configure
•
: Sets volume, tone, duration, and number of various types of
Audio
beeps.
. Decoder configuration can also be accomplished for
(Falcon Management Utility).
FMU
control panel, each containing addi-
Decoding
figures on the following pages.
utility.
Configure > General
Decoding
Start > Settings
Figure 2-
from the menu
2-9
Advertisement
Table of Contents
