Enter/Exit Programming Mode
Digital Watermark (DWM) Features
Digital Watermark (DWM) Enable
Enables/Disables the ability of the scanner to decode Digital Watermarks.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
049001(CR)
Digital Watermark (DWM) = Enable
14
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
The Digital Watermark feature must be enabled for decode
functionality.
NOTE
Digital Watermark (DWM) Features
049000(CR)
Digital Watermark (DWM) = Disable
DEFAULT
Magellan™ 3450VSi