DataBar Limited Enable
DataBar Limited
DataBar Limited Enable
Enables/disables the ability of the scanner to decode DataBar Expanded labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
035401(CR)
Databar Limited = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
035400(CR)
Databar Limited = Disable
171