Upc-A Minimum Read - Datalogic Magellan 3450VSi Product Reference Manual

UPC-A Minimum Read

UPC-A Minimum Read
This feature specifies the minimum number of consecutive UPC-A decodes
before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
006102(CR)
UPC-A Minimum Read = 2
006104(CR)
UPC-A Minimum Read = 4
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
006101(CR)
UPC-A Minimum Read = 1
006103(CR)
UPC-A Minimum Read = 3
119