Enter/Exit Programming Mode
DataBar Expanded EAN-128 Emulation
Enables/disables EAN 128 emulation for DataBar Expanded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D501(CR)
DataBar Expanded EAN-128 Emulation = Enable
176
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
DataBar Expanded EAN-128 Emulation
04D500(CR)
DataBar Expanded EAN-128 Emulation = Disable
Magellan™ 3450VSi