Gs1 Databar; Databar Omnidirectional; Databar Omnidirectional Enable - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

GS1 DataBar

The symbology family GS1 DataBar™ was formerly known as Reduced Space
Symbology (RSS). For the purpose of simplicity, GS1 DataBar variants are listed
in this manual as "DataBar."

DataBar Omnidirectional

DataBar Omnidirectional Enable

Enables/disables the ability of the scanner to decode DataBar Omnidirectional
labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D001(CR)
DataBar Omnidirectional = Enable
166
This value-added feature is a factory-programmed option. Con-
tact your dealer for information about upgrading your system to
include this advanced capability.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
DataBar Omnidirectional Enable
04D000(CR)
DataBar Omnidirectional = Disable
Magellan™ 3450VSi