Databar Expanded 2D Component Enable - Datalogic Magellan 3450VSi Product Reference Manual

DataBar Expanded 2D Component Enable

DataBar Expanded 2D Component Enable
When this feature is enabled, the software will not decode an DataBar Expanded
bar code with a 2D component associated with it, and the 2D component will be
discarded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D701(CR)
DataBar Expanded 2D Component = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
04D700(CR)
DataBar Expanded 2D Component = Disable
177