Wall Mount; Countertop Mount; Adjustable Riser - Datalogic Magellan 3450VSi Product Reference Manual

Wall Mount

Attach the L-Bracket to the wall, securing it in the desired position with two
screws through the two holes in the back face of the L-Bracket as shown in
ure 5. It is recommended to use two pan head (8.2mm or 5/16" maximum head
diameter) #8 screw with a thread profile that suits the mounting surface mate-
rial in the wall.

Countertop Mount

If using the L-Bracket alone for countertop installation, secure the bracket in
place using two screws through the bottom face of the bracket (see
is recommended to use two pan head (8.2mm or 5/16" maximum head diame-
ter) #8 screw with a thread profile that suits the mounting surface material in
the countertop.
CAUTION

Adjustable Riser

The Adjustable Riser may be attached as shown.
Figure 6. Using the Adjustable Riser
Product Reference Guide
Do not use a countersink type of screw head. Damage will occur
from use of a countersunk screw head in the plastic screw bosses
Riser
Wall Mount
Fig-
Figure 5). It
Scanner
5