Enter/Exit Programming Mode
USB-OEM Interface Features
USB OEM Scanner Device Type
The OEM-USB protocol allows for the scanner to be identified as one of two dif-
ferent types of bar code scanners. Depending on what other scanners you may
already have connected to a USB POS, you may need to change this setting to
enable all scanners to communicate. Options are:
•
•
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
050D01(CR)
USB OEM Scanner Device Type = Handheld Scanner
86
Table Top Scanner
Handheld Scanner
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
USB OEM Scanner Device Type
050D00(CR)
USB OEM Scanner Device Type = Table Top Scanner
Magellan™ 3450VSi