Sleep Mode Timer - Datalogic Magellan 3450VSi Product Reference Manual

Sleep Mode Timer

Sleep Mode Timer
This feature specifies the amount of time of inactivity (with no label reads)
before the scanner enters sleep mode.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Scan the Enter/Exit Programming Mode bar code to exit Programming
DEFAULT
Product Reference Guide
Set Sleep Mode Timer on page 17
cover any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
that represent the desired time interval. The selectable range is 000-255
in 15 second increments. Pad all numbers with leading zeros to yield a
three-digit entry (000-255).
Mode.
Enter/Exit Programming Mode
below. You'll need to
Alpha-Numeric Keypad in Appendix C
03AF(CR)
Set Sleep Mode Timer
Default setting for this feature is: 5 minutes
17