Led And Beeper Indicators - Datalogic Magellan 3450VSi Product Reference Manual

LED and Beeper Indicators

LED and Beeper Indicators
The scanner's beeper sounds and its green LED illuminates to indicate various
functions or errors on the scanner. The tables below list these indications. The
scanner's functions are programmable, and so may or may not be turned on.
For example, certain indications such as the power-up beep can be disabled
using programming bar code labels.
LED
INDICATION
INDICATION
Power-on
Bright green flash
indication
Good Read
Bright green flash
Indication
Scanner Ready Constant dim green
Green LED slowly and continu-
Sleep Mode ously changes from off to dim to
off.
Constant green flash at 1 Hz
Host Disable
(100mS on, 900mS off)
Varies (see Error Codes on
Diagnostics
page 291 for more information)
Prog. Mode See Host Disable above.
BEEPER FUNCTIONS
BEEPER
INDICATION
INDICATION
Power On Beep Single beep
Good Read
Single beep
Indication
Varies (see
Diagnostics
more information)
Programming
Varies depending upon the fea-
Mode
ture(s) being configured.
Indications
290
COMMENT
The Power-On Beep indication is a configurable feature
which can be enabled or disabled. When enabled, this beep
Indicates the scanner has finished all its power up tests and
is now ready for operation.
The good read beep indication is configurable. Options
include: Enable/disable, frequency, duration and volume.
See
information.
"Error Codes"
for The Beeper can provide diagnostic feedback if the scanner
discovers a problem during SelfTest.
The Beeper will sound as programming bar code labels are
scanned, indicating progress during scanner configuration.
COMMENT
Indicates the scanner has finished all its power up tests
and is now ready for operation.
Indicates a bar code has been read and decoded.
The scanner is ready for operation. The LED is also configu-
rable to off when idle and ready for operation
The scanner is in Sleep Mode. To wake the scanner up,
move an object in front of its window or press the button
atop the unit. This indication is configurable and may be
programmed to behave differently.
The scanner is disabled due to receiving a disable command
from the POS terminal.
The LED can provide diagnostic feedback if the scanner dis-
covers a problem during SelfTest.
The scanner is in Programming Mode.
LED and Beeper Indicators on page 2-57 for more
Magellan™ 3450VSi