60-Minute Data Timeout On Inactivity; Beeper Control For Radio Response - Datalogic PreScan Advanced Configuration Manual

60-Minute Data Timeout on Inactivity

If a handheld unit is totally inactive for over 60 minutes, an option is available to clear that
device's memory. It is recommended that this feature be enabled to prevent a build-up of
abandoned baskets.
CAUTION
60 Minute Data Timeout on Inactivity = Disable

Beeper Control for Radio Response

This feature offers the following options:
•
•
•
•
Beeper Control for Radio Response = Normal
Beeper Control for Radio Response =
Beep only on good decode
Advanced Configuration Guide
Enabling this feature will clear all data from memory if the device is left
unused.
$+IQ0$-
Normal — Beep on good decode and good reception
Off
Beep only on good decode
Beep only on good reception
$+BF0$-
$+BF1$-
PowerScan Configuration
60 Minute Data Timeout on Inactivity = Enable
$+IQ1$-
Beeper Control for Radio Response = OFF
$+BF3$-
Beeper Control for Radio Response =
Beep only on good reception
$+BF2$-
15