Enter/Exit Programming Mode
EAN-8 Guard Insertion
This setting enables the insertion of either a missing leading or trailing guard
to a scanned bar code.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
054301(CR)
EAN-8 Guard Insertion = Enable
136
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
EAN-8 Guard Insertion
054300(CR)
EAN-8 Guard Insertion = Disable
Magellan™ 3450VSi