Databar Limited Ean128 Emulation Enable - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

DataBar Limited EAN128 Emulation Enable

Enables/disables GS1-EAN128 emulation for GS1 Databar Limited.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
036301(CR)
Databar Limited EAN128 Emulation = enable
174
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
DataBar Limited EAN128 Emulation Enable
036300(CR)
Databar Limited EAN128 Emulation = disable
Magellan™ 3450VSi