Aztec Length 1, Length 2 Programming Instructions - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Aztec Length 1, Length 2 Programming Instructions

If Aztec Length Control is set to Fixed-Length decoding, this feature specifies
Aztec first fixed length. If Aztec Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
NOTE
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
Default setting for this feature = 0001
0434(CR)
Set Aztec Length 2
280
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode. Length 2 is the maximum label
length if in variable length mode, or the second fixed length if in fixed
length mode. Length includes the bar code' s data characters only. Any
value > 3700 will be considered to be 3700.
Set Aztec Length 1 on page 280
on page 280 below. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar code you
intend to scan.
that represent the desired label length. The selectable range for this
option is 0001 to 3700. Pad all numbers with leading zeros to yield a four-
digit entry (0001-3700).
gramming Mode bar code.
Aztec Length Control
or
Alpha-Numeric Keypad in Appendix C
0433(CR)
Set Aztec Length 1
Default setting for this feature = 0E74
Set Aztec Length 2
Magellan™ 3450VSi