Single Cable RS-232 Features
Single Cable RS-232 Pacesetter Plus
This option enables the scanner's ability to send Pacesetter Plus information as
trailers to UPC/EAN bar codes.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
050801(CR)
Single Cable RS-232 Pacesetter Plus = Send
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
050800(CR)
Single Cable RS-232 Pacesetter Plus = Do Not Send
85