Data Matrix Length 1, Length 2 Programming Instructions - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Data Matrix Length 1, Length 2 Programming Instructions

If Data Matrix Length Control is set to Fixed-Length decoding, this feature
specifies Data Matrix first fixed length. If Data Matrix Length Control is set to
Variable-Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
Default setting for this feature = 0001
0104(CR)
Set Data Matrix Length 2
260
For Data Matrix bar codes, only the data characters are
included in the length calculations.
NOTE
Set Data Matrix Length 1 on page
Length 2 on page 260
on this and the facing page to ensure that the scanner reads only the bar
code you intend to scan.
that represent the desired label length. The selectable range for this
option is 0001 to 3116. Pad all numbers with leading zeros to yield a four-
digit entry (0001-3116).
gramming Mode bar code.
below. You'll need to cover any unused bar codes
Alpha-Numeric Keypad in Appendix C
0103(CR)
Set Data Matrix Length 1
Default setting for this feature = 0320
Data Matrix Length Control
260or Set Data Matrix
Magellan™ 3450VSi