Micro QR Code Enable
Micro QR Code
Micro QR Code Enable
Enables/disables the ability of the scanner to decode Micro QRCode labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
042801(CR)
Micro QR Code = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
042800(CR)
Micro QR Code = Disable
275