In-Store Printed Label Minimum Read - Datalogic Magellan 3450VSi Product Reference Manual

In-Store Printed Label Minimum Read

In-Store Printed Label Minimum Read

This feature specifies the minimum number of consecutive In-Store Printed
Label decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
008502(CR)
In-Store Printed Label Minimum Read = 2
008504(CR)
In-Store Printed Label Minimum Read = 4
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
008501(CR)
In-Store Printed Label Minimum Read = 1
008503(CR)
In-Store Printed Label Minimum Read = 3
145