Appendix D. Factory Default Settings; Factory Default Settings - Datalogic Magellan 3450VSi Product Reference Manual

The following table provides a listing of the most common factory settings for
the interfaces shown.
NOTE

Factory Default Settings

Feature
General Scanner Features
1D Double Read Time-
out on page 12
2D Double Read Time-
out on page 13
Digital Watermark
(DWM) Enable on page
14
Digital Watermark
(DWM) Double Read
Timeout on page 15
Digital Watermark
(DWM) Data Format on
page 16
Sleep Mode Timer on
page 17
1D Inverse Read Con-
trol on page 18
2D Inverse Read Con-
trol on page 19
Illumination During
Disable Mode on page
20
Product Reference Guide
Some of the individual interfaces listed in the defaults table below
appear in the same column since they share similar feature set-
tings with few (if any) exceptions.
Keep in mind though, that the actual configuration storage area for
each interface is unique and that updates & changes to factory
defaults can be made at any time without notice.
Default
RS-232
Master
28 (400ms) 28 (400ms)
46 (700ms) 46 (700ms)
01 (enable) 01 (enable)
0.5 Sec. 0.5 Sec.
00 00
(compatibility (compatibil
mode) ity mode)
5 minutes 5 minutes
0000
0000 (disable)
(disable)
00
00 (disable)
(disable)
01 (enable) 01 (enable)
Factory Default Settings
RS-232 RS-232
Wincor- Single Keyboard
Nixdorf Cable
28 (400ms) 28 (400ms) 28 (400ms)
46 (700ms) 46 (700ms) 46 (700ms)
01 (enable) 01 (enable) 01 (enable)
0.5 Sec. 0.5 Sec.
00 00
(compatibil (compatibil (compatibil
ity mode) ity mode) ity mode)
5 minutes 5 minutes 5 minutes
0000 0000
(disable) (disable)
00 00
(disable) (disable)
01 (enable) 01 (enable) 01 (enable)
Appendix D
USB COM
/ USB OEM
USB TEC
28 (400ms) 28 (400ms)
46 (700ms) 46 (700ms)
01 (enable) 01 (enable)
0.5 Sec. 0.5 Sec.
00 00
(compatibil (compatibility
ity mode)
5 minutes 5 minutes
0000 0000
0000 (disable)
(disable) (disable)
00 00
00 (disable)
(disable) (disable)
01 (enable) 01 (enable)
0.5 Sec.
00
mode)
297