Enter/Exit Programming Mode
DataBar Limited Minimum Read
This feature specifies the minimum number of consecutive Databar Limited
decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
035502(CR)
Databar Limited Minimum Read = 2
035504(CR)
Databar Limited Minimum Read = 4
172
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
DataBar Limited Minimum Read
035501(CR)
Databar Limited Minimum Read = 1
035503(CR)
Databar Limited Minimum Read = 3
Magellan™ 3450VSi