Enter/Exit Programming Mode
Reading Illumination Duration
This feature specifies how long the illumination stays on after a label or label segment is
read.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
04EB3C(CR)
Reading Illumination Duration = 3 Seconds
DEFAULT
22
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Reading Illumination Duration
04EB14(CR)
Reading Illumination Duration = 1 Seconds
04EB64(CR)
Reading Illumination Duration = 5 Seconds
Magellan™ 3450VSi