Table of Contents
Advertisement
Operation
Scanning
The surface from the conveyor belt and beneath the arches up to, and including the transition plate
constitutes the effective scanning area. Imager/cameras distributed throughout the arches "curtain"
the area within that zone for scanning items on five sides. The sixth side (bottom) of an item is scanned
by the upward-facing optics (bottom scanner) beneath the transition plate.
Items for purchase are placed in the queuing zone of the conveyor belt, then swiftly carried by the con-
veyor through the scanning arches and over the transition plate. Once the item has passed through the
scanner, it is ready to accept another item. Since this process takes only seconds, the queuing area is
cleared and ready for another item almost immediately.
Items are placed on the belt without regard to whether the bar code for the previ-
ously placed item was successfully read. The scanner will use ViPR object recogni-
tion technology in an attempt to recognize any unread items. If an item remains
unidentified, image and object information are sent to the POS so that the item can
NOTE
be added to the transaction manually or by some other means.
Scan Zone: Arches
Control Panel
Depending on your model, the Control Panel is located either below or above the System Control Box.
The Control Panel is part of the Lower Assembly and is accessed by sliding it out from the unit.
Control Panel Functions include but are not limited to visual display for the internal computer running
the Scanner software.
4
-OR-
Control Panel
Transition Plate
Scan Zone:
Bottom Scanner
Jade™ X7 Portal Scanner
Advertisement
Table of Contents
