Ean Two Label Combined Transmission - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

EAN Two Label Combined Transmission

Enables/disables the transmitting of an EAN two label pair as one label.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
02E201(CR)
EAN Two Label Combined Transmission = Enable
156
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
EAN Two Label Combined Transmission
02E200(CR)
EAN Two Label Combined Transmission = Disable
Magellan™ 3450VSi