Msi Number Of Check Characters - Datalogic Magellan 3450VSi Product Reference Manual

MSI Number of Check Characters

MSI Number of Check Characters
Specifies number of MSI check characters to be calculated and verified.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code below representing the desired number of MSI check
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
021701(CR)
MSI Number of Check Characters = 2
Product Reference Guide
Check characters are always modulus 10.
NOTE
characters to be calculated and verified. You'll need to cover any unused
bar codes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
021700(CR)
MSI Number of Check Characters = 1
239