Codabar Check Character Calculation - Datalogic Magellan 3450VSi Product Reference Manual

Codabar Check Character Calculation

Codabar Check Character Calculation
Enables/disables calculation and verification of an optional Codabar check
character.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
007101(CR)
Codabar Check Character Calculation = Enable
Product Reference Guide
If check character calculation is disabled, the risk is increased that
a misread can occur. When disabled, any check characters in a bar
code are treated as data characters.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
007100(CR)
Codabar Check Character Calculation = Disable
221