DataBar Limited 2D Component Enable
DataBar Limited 2D Component Enable
This feature controls if a 2D label component be decoded when a Databar Lim-
ited base label is decoded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
035801(CR)
Databar Limited 2D Component = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
035800(CR)
Databar Limited 2D Component = Disable
173